3.5 Network Configuration—[6] Wireless
3.5.1 Network Configuration—[6-1] Wireless—Radio Settings
The wireless radio settings can be programmed.
Screen / Tab
Setting item
Description
Input Type
Note
1.Radio
Settings -
WLAN Radio
Settings
Common Settings -
WLAN Radio
Enable
Enable / Disable of WLAN
Radio in the PBX.
Check
Common Settings -
WLAN Radio
Status
WLAN Radio's physical
status - UP or DOWN.
-
Common Settings -
Frequency Band
Frequency Band for
WLAN
-
Common Settings -
Auto Channel
Select Enable
To enable automatic
channel selection support.
Check
Common Settings -
Channel No.
Channel No. to be used in
WLAN AP. When Auto
Channel Select is
enabled, this option
cannot be used.
Select
Common Settings -
Operational Mode
Operational Mode of
WLAN
Select
Common Settings -
Auto Rate Fallback
Enable
For enabling Automatic
Rate Fallback support in
WLAN AP.
Check
802.11n Settings -
Channel
Bandwidth
Channel Bandwidth - 20 or
40 MHz.
Select
802.11n Settings -
Extension Channel
Extension channel
position - Above Control
Channel or Below Control
Channel.
Select
802.11n Settings -
20/40 MHz Co-
Existence Enable
20 MHz and 40 MHz
frequencies to co-exist.
Check
802.11n Settings -
Guard Interval
Guard interval between
channels.
Select
Configure
Advanced Radio
Settings -
Advanced Radio
Settings Button
Clicking this button allows
you to modify the
Advanced Radio Settings.
For normal operation of
WLAN AP functionality,
changing the values in
Advanced Settings is not
recommended.
-
3.5 Network Configuration—[6] Wireless
66
Programming Item List
