Screen / Tab
Setting item
Description
Input Type
Note
DISA Cyclic Tone -
Tone on Maximum
Time (ms)
Selects the tone-on
maximum time.
Select
This setting can be
selected if DISA Cyclic
Tone is selected for
the Option.
DISA Cyclic Tone -
Tone off Maximum
Time (ms)
Selects the tone-off
maximum time.
Select
This setting can be
selected if DISA Cyclic
Tone is selected for
the Option.
DISA Cyclic Tone -
Repeating Times
of ON/OFF for
Detection
Selects the number of
times of tone on/off to
determine detection.
Select
This setting can be
selected if DISA Cyclic
Tone is selected for
the Option.
2.4.6 PBX Configuration—[3-6] Trunk—Analog CO Property
Description
Analog CO property settings can be programmed.
Screen / Tab
Setting item
Description
Input Type
Note
6.Analog CO
Property
Caller ID Waiting to
Receive
Specifies the length of
time that the PBX waits to
receive Caller ID from an
analog trunk.
Select
Outgoing Guard
Time
Specifies the length of
time after a trunk is
disconnected, during
which the PBX cannot
seize the line.
Select
First Dial Timer
(CO)
Specifies the minimum
time that the PBX waits
after seizing a trunk,
before sending the dialed
digits to the telephone
company.
Select
Bell Detection -
Bell Start Detection
Timer
Specifies the minimum
length of a bell signal that
can be recognized by the
PBX as the bell signal
sent from the telephone
company, before the PBX
detects an arriving call.
Select
Bell Detection -
Bell Off Detection
Timer
Specifies the duration of
the bell off detection timer.
Select
Pulse / DTMF Dial
- DTMF Inter-digit
Pause
Specifies the length of the
DTMF inter-digit pause.
Select
2.4.6 PBX Configuration—[3-6] Trunk—Analog CO Property
44
Programming Item List
