3.
The Web Maintenance Console login screen is displayed. Log in with the Installer level account name
and the password.
•
The Installer level account name is "INSTALLER".
•
The Installer level account password is preprogrammed in
Web Maintenance Password for
Remote Access
. Refer to 4.2.1 Maintenance—[1-1] Management—Web Programming in the
Programming Item List.
When the PBX is connected to an existing network router:
When the PBX is connected to an existing network router, the port forwarding settings of the network router
must be configured. The format of the address to enter to connect to the PBX connection will be as follows:
https://XXX.XXX.XXX.XXX:yyy
•
"XXX.XXX.XXX.XXX" is the IP address of a device that can be accessed from the Internet, such as the IP
address of a network router.
•
"yyy" is a HTTPS port number of the PBX. If this port number is 443 (default), you do not have to enter
"yyy". To change the port number of the PBX, Refer to 3.6.3 Network Configuration—[7-3] Firewall—
Application Server Settings in the Programming Item List.
3.9.4 Programming the PBX
3.9.4.1 Easy Setup Wizard
In the Easy Setup Wizard, you will set up the mandatory settings required for the PBX.
When you log in to Web Maintenance Console for a PBX that is in its initialized, factory default state, the
Easy Setup Wizard for that PBX will launch automatically. You must log in using the Installer level account
name and password.
–
The Installer level account name is "INSTALLER".
–
The default Installer level account password is "1234". This password can be programmed in
Web
Maintenance Password for Local Access
. Refer to 4.2.1 Maintenance—[1-1] Management—Web
Programming in the Programming Item List.
Set the following items in the setting screens.
WebMC Language
Location Setting
Password Setting
1.Date & Time
2.Numbering
3.Incoming Call
4.Dialling Plan
5.IP
3.9.4.2 Login Management
Login management for the Web-MC is conducted in the below fashion.
•
When connecting to the Web-MC from a LAN, upon failing to log in three consecutive times within ten
minutes, you will not be able to log in again until one hour has passed or you have performed a reset by
switching the power to OFF then ON.
•
When conducting remote access from a WAN, upon failing to log in three consecutive times within ten
minutes, you will no longer be able to log in. To enable yourself to log in, refer to 4.2 Maintenance—[1]
Management-1.Web Programming-Web Programming-Remote Web Maintenance in Programming Item
List.
3.9.4 Programming the PBX
90
Getting Started
