Mounting on a Concrete
The included screws may be used when mounting the main unit on a concrete. User supplied anchor plugs
are also necessary.
1.
Place the template (found on the last page of this manual) on the wall to mark the 2 screw positions.
A
B
A Template
B 225 mm (8-7 / 8 in)
Note
When you print out the template, the distance on the paper output may deviate slightly from the
indicated measurement. In this case, use the indicated measurement.
2.
Drill holes in the wall as marked and fit the anchor plugs (not included) into the holes.
C
D
E
F
C Hammer
D Anchor Plug
E 6.4 mm (1/4 in)
F 29 mm (1-9 / 64 in)
3.
Fit the washers on the screws, and drive the screws into the anchor plugs.
Drive the screw to this point.
3.2.8 Wall Mounting
54
Getting Started
