2
SUMMARY
This document is a reference for configuring “
LCR Telecom
” SIP trunks onto Panasonic HTS and
includes the settings required for Incoming Call DDI routing and Outgoing Call CLI presentation.
SIP trunk specific account details are provided to you by
LCR Telecom
.
Attention:
This document was created based on the results of test environment accounts.
Panasonic cannot guarantee SIP Trunk operation in all environments, however as a result of
completing this Inter-Operability Test Panasonic will provide technical support for any issues
experienced an assist as far as possible in providing a resolution.
Please obtain relevant information from Service provider before configuration of SIP trunks.
Panasonic will not be held liable for any information provided in this guidance document.
Information used in this document is for interoperability testing.
Information and Specifications in this document are subject to change without notice.
Note
CLIR
HTS and LCR do not support CLIR (Anonymous).
CLIP when Transfer/Forward to CO
LCR does not support to notify the call originator CLI when call Transfer/Forward to CO.
Table of Contents
(1) SIP Trunk, Extension Port Number and NAT Configuration:
Page 4
(2) Network Settings:
Page 5
(3) Trunk Port Attribution:
Page 7
(4) Provisioning a SIP trunk:
Page 8
(5) Incoming Call Routing:
Page 12
(6) Outgoing Call CLI:
Page 13
(7) CLIR Outgoing Call (Anonymous calls):
HTS Not supported
Page 14
