1
Make sure that the front cover and
the mounting adaptor are firmly
attached to the sensor.
2
Affix the double-sided tape to the
mounting adaptor.
R
Make sure the tape covers the
screw holes on the mounting
adaptor.
3
Attach the sensor to the inside of
the garage door.
R
Make sure the mounting
adaptor release lever is facing
down when the garage door is
closed.
R
Press firmly to ensure solid
adhesion to the installation
surface.
Removing when secured with
double-sided tape
1
Tie a piece of thread to two sticks,
screwdrivers, etc.
2
Pull the thread tight and use it to
cut the double-sided tape, and
then remove any excess tape (
A
).
A
14
For assistance, visit www.panasonic.ca/english/support
Setup
HNS107C_(en_en)_0212_ver.011.pdf 14
2016/02/12 9:35:26
