![Panasonic KX-HNL200 Installation Manual Download Page 10](http://html.mh-extra.com/html/panasonic/kx-hnl200/kx-hnl200_installation-manual_279334010.webp)
Installation
Important:
R
Switch off the power of the
corresponding circuit before
performing any electrical work.
R
Follow all local codes and
regulations.
R
Installation should be performed by
a licensed electrician.
R
The switch cannot be used in 3-way
circuits, i.e., situations where two
light switches control the same light
fixture, such as at the top and
bottom of a stairway.
Preparation
These steps are necessary when
replacing a switch.
1
Turn off the power to the circuit at
the circuit breaker or fuse panel.
TEMP
2
Remove the existing wall plate,
then remove the existing switch
from the junction box.
TEMP
R
Be careful not to touch any
wires connected to the existing
switch.
3
Use a non-contact circuit tester to
confirm that the wires connected
to the existing switch are not
carrying power.
TEMP
10
For assistance, please visit http://shop.panasonic.com/support
Setup
Summary of Contents for KX-HNL200
Page 19: ...19 Notes ...