5
Attach the safety wire to the wall.
R
Place the ring of the safety wire (
A
)
on the wall.
R
Place the washer (
B
) on top of the
ring of the safety wire.
R
Tighten the screw (
C
) for the safety
wire on top of the washer.
1
2
3
Note:
R
Attach the safety wire while it is bent.
R
Attach the safety wire high on the wall
so that the camera does not strike
anyone in the event the camera
detaches from the wall.
R
Do not hang from the camera or stand.
6
Connect the DC cable to the AC adaptor.
R
Pull the DC cable indoors, and connect
the DC cable plug (
A
) to the AC
adaptor plug (
B
).
R
Connect the AC adaptor (
C
) to the
power outlet.
1
Outdoors
2
Indoors
3
2
1
1
2
Note:
R
Use only the supplied Panasonic AC
adaptor PNLV236E.
R
Be sure to connect the DC cable plug
and AC adaptor plug indoors.
Note about power connections
AC adaptor connection
R
The AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R
The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.
Power failure
R
The camera will not work during a power
failure.
24
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228
Setup
HNC600E_(en_en)_1227_ver.102.pdf 24
2016/12/27 23:35:23
