Part names and functions
C
B
A
D E
G
H
I
F
Speaker
LED indicator
DC jack
LINE jack
M
Wi-Fi SETUP
N
Used when performing initial setup.
microSD card slot
Used when inserting a microSD card.
Remove the label when inserting.
M
HANDSET/LOCATOR
N
Used when registering a handset. You
can also press this button to locate a
misplaced handset.
M
CAMERA
N
Used when registering a camera.
M
OTHER DEVICE
N
Used when registering other devices,
such as sensors and smart plugs.
LED indicator
You can use the LED indicator to confirm the
hub’s status.
Indicator
Status
Off
No power, or LED
indicator is turned
off
*1
Green, lit
Normal operation,
connected to
wireless router
*1
Green, blinking
slowly
Registration mode
Green, blinking
quickly
Hub is searching for
wireless router
Alternating:
Green, blinking
slowly
Yellow, blinking
slowly
Hub is starting up
(cannot be used
yet)
*2
Red, lit
Alarm system is
armed
*1
Red, blinking quickly Alarm system was
triggered
Yellow, lit
Initial setup required
Yellow, blinking
slowly
Initial setup in
progress, mobile
device connected
Yellow, blinking
Initial setup is
starting
*1 You can configure the hub so that its LED
indicator does not light during normal
operation. For more information, refer to
the User’s Guide (page 17).
*2 It may take some time for the hub to finish
starting up.
10
For assistance, please visit http://shop.panasonic.com/support
Setup
HNB600_(en_en)_0124_ver.201.pdf 10
2017/01/25 10:22:35
