Panasonic KX-HN7002, Installation Manual

Page: 18 / 64

Part names and functions
Access Point
A
B
F
E
D
C
A LED indicator D DC jack
B microSD card slot E LAN jack
C M SETUP N F Reset button
Access point LED indicator
You can use the LED indicator to confirm the access point’s status.
Access point LED indicator Status
Off
No power, or LED indicator is turned off
*1
Amber, lit Power on until start up completed
Amber, blinking quickly IP address is not obtained, or Ethernet cable is not
connected to the router
Green, lit
Power is on (normal operations)
*1
, or registration
completed for the camera or smartphone
Green, blinking slowly Registration mode, updating
Green, blinking quickly
Obtaining an IP address, or accessing a microSD card
*1
Green, lit
«
Amber, lit
(alternating)
Starting up
*2
Red, lit Registration failed
*1 You can configure the access point so that its LED indicator does not light during normal
operation. For more information, refer to the User’s Guide (page 32).
*2 It may take some time for the access point to finish starting up.
18 For assistance, please visit http://shop.panasonic.com/support
Setup
HN7001̲(en̲en)̲0209̲ver.140.pdf 18 2018/02/09 11:33:53