Operating Instructions
86
Specifying the Pan/Tilt range
1.
Start up the web browser and access the Single Camera screen.
2.
Start up another web browser and access Camera Setup window.
3.
Align the Single Camera screen and Camera Setup window from side to side.
4.
Adjust the Pan operation on the Single Camera screen and select [Current] in
the minimum value data field of the Pan range on Camera Setup window. The
data field refreshes to read the current value of the Pan range.
5.
Specify the each home position/maximum value of the Pan range and each
minimum/home position/maximum value of the Tilt range following the
instruction shown in the step 4.
Note
The available minimum/maximum values will be different depending on
mounting on the table or mounting on the ceiling. Minimum value must be
lower than maximum value. Home position value must be in the range between
minimum and maximum values.
6.
Click [Save] when finished.
Mounting on the table
Max.: 0˚
+175˚
-175˚
Min.: -120˚
Mounting on the ceiling
Max.: +90˚
-175˚
+175˚
Min.: 0˚
Summary of Contents for KX-HCM280
