Panasonic KX-FT982FX Operating Instructions Manual Download

Page: 4 / 52

1. Installation and Quick Start

1 Installation and Quick Start

Accessories

1.1 Included accessories

Note:

If any items are missing or damaged, contact the
place of purchase.

Save the original carton and packing materials for
future shipping and transportation of the unit.

1.2 Accessory information

1.2.1 Available accessories

tandard thermal recordin

paper

(KX-A106):

216 mm

30 m roll, with 25 mm core

*1 Use only the included or specified recording

paper. Using other recording paper may affect
print quality and/or cause excessive wear to the
thermal head.

Connections and Set up

1.3 Connections

Important:

The unit will not function when there is a power
failure. To make calls in emer

ency situations,

you should connect a telephone that can
function durin

a power failure to the telephone

line.

Caution:

When you operate this product, the power outlet
should be near the product and easily
accessible.

Be sure to use the telephone line cord included in
this unit.

Do not extend the telephone line cord.

Keep the unit away from walls as far as possible
to prevent a recordin

paper jam.

Note:

Before you can make calls, the dialling mode setting
may need to be changed (page 11).

Telephone line cord

Handset

Handset cord

Recording paper

Paper stacker
(KX-FT9

only)

Operating instructions

Paper stacker (KX-FT9

only)

Make sure the paper stacker must not touch the
wall.

The paper stacker may not be shown in all
illustrations in these operating instructions.

Power cord

Connect to the power outlet (220 V – 240 V,
50/60 Hz).

Telephone line cord

Connect to

[

LINE

]

jack and a single telephone

line jack.

[

EXT

]

jack

Handset cord

Extension telephone (not included)

This model is designed to be used in East Europe,
Czech and Slovakia. TO USE IN CZECH OR
SLOVAKIA, CHANGE THE LOCATION SETTING
(feature #74 on page 35).

Summary of Contents for KX-FT982FX





















































Search results

Summary of Contents for KX-FT982FX

Reviews:

Related manuals for KX-FT982FX

Brands by name

Popular brands

Panasonic KX-FT982FX, Operating Instructions Manual

Search results

Summary of Contents for KX-FT982FX

Reviews:

Related manuals for KX-FT982FX

Brands by name

Popular brands