8. Programmable Features
34
8
.
Press
{
S
ET
}
.
9.
Enter the transmission start time.
L
If you select 12-hour time entry when you set the
date and time (page 11), press
{*}
repeatedly to
select
“
AM
”
or
“
PM
”
.
L
If you selected 24-hour time entry when you set
the date and time (page 11), the time is set using
24-hour time entry.
10.
Press
{
S
ET
}
.
11.
Press
{
MENU
}
.
Note:
L
To cancel after programming, press
{
S
TOP
}
then
{
S
ET
}
.
Code #26:
S
ettin
g
the Caller ID list to print
automatically
AUTO CALL. LIST
=OFF
[
±
]
“
ON
”
: The Caller ID list will be printed automatically each
time the unit logs 30 different callers (page 16).
“
OFF
”
(default): The Caller ID list will not be printed, but
the unit will keep a record of the information for the last
30 different callers.
Code #36: Receivin
g
oversized documents
RCV REDUCTION
=ON
[
±
]
To slightly reduce the received fax image when printing,
so that the received document will be approximately the
same length as the original document.
“
ON
”
(default): The received fax image will be printed
slightly smaller than the original image.
“
OFF
”
: Deactivates this feature. The received fax image
will be printed at the same size as the original image.
Note:
L
A slight margin will be added to the printed
documents, and therefore if this feature is turned OFF,
the received document will be slightly longer than the
original document.
Code #39: Chan
g
in
g
the display contrast
LCD CONTRAST
=NORMAL
[
±
]
“
NORMAL
”
(default): For normal contrast.
“
DARKER
”
: Used when the display contrast is too light.
Code #41: Chan
g
in
g
the fax activation code
FAX ACTIVATION
=ON
[
±
]
If you wish to use an extension telephone (page 24) to
receive faxes, activate this feature and program the
activation code.
1.
Press
{
MENU
}
.
2.
Press
{#}
, then
{
4
}{
1
}
.
3.
Press
{A}
or
{B}
repeatedly to select
“
ON
”
.
4.
Press
{
S
ET
}
.
5.
Enter your code (2 to 4 digits) using the dial keys
{
0
}
–
{
9
}
,
{*}
and
{#}
.
L
The default code is
“
;
#9
”
.
6.
Press
{
S
ET
}
.
7.
Press
{
MENU
}
.
Code #44:
S
ettin
g
the memory reception alert
RECEIVE ALERT
=ON
[
±
]
To alert you with a beeping sound when a received fax
document is stored into memory due to some existing
problem.
The slow beeps will continue until you clear the printing
problem and make sure the unit is supplied with enough
paper to print the stored document.
“
ON
”
(default): You will be alerted to a reception problem
by a beeping sound.
“
OFF
”
: Deactivates this feature.
Code #46:
S
ettin
g
friendly reception
FRIENDLY RCV
=ON
[
±
]
To receive a fax automatically when you answer a call
and hear a fax calling tone (slow beep).
“
ON
”
(default): You do not have to press
{
FAX/
S
TART
}
for fax reception.
“
OFF
”
: You have to press
{
FAX/
S
TART
}
for fax
reception.
Code #47:
S
ettin
g
the voice
g
uidance (KX-FT9
88
only)
VOICE GUIDANCE
=ON
[
±
]
If you wish to hear voice guidance, activate this feature.
“
ON
”
(default): You will hear the friendly reception voice
guide, pre-recorded messages and voice time/day
stamp.
“
OFF
”
: Deactivates this feature.
Code #4
8
:
S
electin
g
the lan
g
ua
g
e
LANGUAGE
=ENGLISH
[
±
]
The display and reports will be in the selected language.
“
ENGLISH
”
(default): English is used.
“
CZECH
”
: Czech is used.
“
SLOVAK
”
: Slovak is used.
1.
Press
{
MENU
}
.
2.
Press
{#}
, then
{
4
}{
8
}
.
3.
Press
{A}
or
{B}
repeatedly to select the desired
language.
4.
Press
{
S
ET
}
.
5.
Press
{
MENU
}
.
