Panasonic KX-FT71LA-B, Service Manual

Page: 94 / 209

Code Function Set Value Effective
Range
Default Remarks
501 Setting the pause
time
001~600 X 100
msec 001~600 050 Selects the pause time in 100
msec steps.
502 Setting the flash
recall time
01~99 X 10 msec 01~99 70 Selects the line break time
flashing in 10 msec steps.
503 Setting the pulse
dial speed
1:10pps 2:20pps 1, 2 1 Sets the pulse dial speed.
520 Setting the CED
frequency
1:2100Hz 2:
1100Hz 1, 2 1
When international
communications cannot be
performed smoothly select
1100Hz. However some exchange
system should not be accopted
(1100Hz on CED). (See "5.
copy, but cannot transmit/
long distance or international
communications" in
DEFECTIVE
FACSIMILE SECTION ().)
521 Setting the
international line
mode
1:ON 2:OFF 1, 2 1
Selects the international line
during FAX communication.
"5. Unit can copy, but cannot
transmit/receive long distance
international communications"
DEFECTIVE FACSIMILE SECTION
().)
522 Auto standby select 1:ON 2:OFF 1, 2 1 Set the resolution and contrast
conditions for FAX or copy
default settings.
523 Receive equalizer
select
1:ON 2:OFF 1,2 2 When the telephone station
from the unit or reception
be performed correctly, adjust
accordingly.
524 SND EQL. 1:ON 2:OFF 1,2 2 When the telephone station
from the unit or reception
be performed correctly, adjust
accordingly.
531 Release PIN code
for DIAL LOCK
1:ON 2:YES 1,2 1 When you want to velease
code for dial lock, press the
key. Then the setting value
to the default.
544 Selecting the
document feed
position
01~99 step 00~99 50 When the ADF function is
incorrect, adjust the feed position.
(8 step = 1mm)
550 Memory clear Press "START/COPY/SET".
551 ROM version and sum check Press "START/COPY/SET".
553 Setting the FAX
monitor function
1: OFF 2:PHASE
B 3:ALL 1, 2, 3 1 Sets whether to monitor the
signal with the unit's speaker
during FAX communication
94