Error Messages
94
For Fax Advantage assistance, call 1-800-435-7329.
Display
If the unit detects a problem, one or more of the following messages will appear on the display.
Base unit
CALL SERVICE
CALL SERVICE2
L
There is something wrong with the unit.
Contact our service personnel.
CHECK DOCUMENT
L
The document was not fed into the unit
properly. Reinsert the document. If
misfeeding occurs frequently, clean the
document feeder rollers (page 108) and try
again.
L
Attempted to transmit a document longer
than 600 mm. Press
{
{
{
{
STOP
}
}
}
}
to remove the
document. Divide the document into two or
more sheets and try again.
CHECK MEMORY
L
The memory (telephone numbers,
parameters, etc.) has been erased. Re-
program.
CHECK PAPER
L
The recording paper is not installed or the
unit has run out of paper. Install paper and
press
{
{
{
{
SET
}
}
}
}
to clear the message.
To continue copying, try again (page 68).
L
The recording paper was not fed into the unit
properly (page 105). Reinstall paper
(page 18) and press
{
{
{
{
SET
}
}
}
}
to clear the
message.
L
The recording paper has jammed near the
recording paper entrance. Clear the jammed
paper (page 103) and press
{
{
{
{
SET
}
}
}
}
to clear
the message. Do not install folded or heavily
curled paper.
COVER OPEN
b
CHECK FILM
L
The covers are open. Close them.
L
The ink film is empty. Replace the ink film
with a new one (page 101).
L
The ink film is not installed. Install it
(page 14).
L
The ink film is slack. Tighten it (see step 7 on
page 102).
DIRECTORY FULL
L
There is no space to store new entries in
navigator directory. Erase unnecessary
entries (page 45).
FAX IN MEMORY
L
The unit has a document in memory. See the
other displayed message instructions to print
out the document.
FAX MEMORY FULL
L
The memory is full of received documents
due to a lack of recording paper or a
recording paper jam. Install paper (page 18)
or clear the jammed paper (page 103).
L
When performing memory transmission, the
document being stored exceeds the memory
capacity of the unit. Transmit the entire
document manually.
MEMORY FULL
L
When making a copy, the document being
stored exceeds the memory capacity of the
unit. Press
{
{
{
{
STOP
}
}
}
}
to clear the message.
Divide the document into sections.