background image

3

For fax advantage assistance, call 1-800-435-7329.

Important safety instructions

!

When using this unit, basic safety precautions
should always be followed to reduce the risk of
fire, electric shock, or personal injury.

1. Read and understand all instructions.
2. Follow all warnings and instructions marked

on this unit.

3. Unplug this unit from power outlets before

cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.

4. Do not use this unit near water, for example

near a bath tub, wash bowl, kitchen sink, or
the like.

5. Place the unit securely on a stable surface.

Serious damage and/or injury may result if
the unit falls.

6. Do not cover slots and openings on the

unit. They are provided for ventilation and
protection against overheating. Never place
the unit near radiators, or in a place where
proper ventilation is not provided.

7. Use only the power source marked on the

unit. If you are not sure of the type of power
supplied to your home, consult your dealer
or local power company.

8. For safety purposes this unit is equipped

with a three prong grounded plug. If you do
not have this type of outlet, please have
one installed. Do not use any type of
adaptor plug to defeat this safety feature.

9. Do not place objects on the power cord.

Install the unit where no one can step or trip
on the cord.

10. Do not overload wall outlets and extension

cords. This can result in the risk of fire or
electric shock.

11. Never push any objects through slots in this

unit. This may result in the risk of fire or
electric shock. Never spill any liquid on the
unit.

12. To reduce the risk of electric shock, do not

disassemble this unit. Take the unit to an
authorized servicenter when service is
required. Opening or removing covers may
expose you to dangerous voltages or other
risks. Incorrect reassembly can cause
electric shock when the unit is subsequently
used.

13. Unplug this unit from the wall outlet and

refer servicing to an authorized servicenter
when the following conditions occur:

A. When the power supply cord or plug is

damaged or frayed.

B. If liquid has been spilled into the unit.
C. If the unit has been exposed to rain or

water.

D. If the unit does not work normally by

following the operating instructions.
Adjust only controls covered by the
operating instructions. Improper
adjustment may require extensive work
by an authorized servicenter.

E. If the unit has been dropped or

physically damaged.

F. If the unit exhibits a distinct change in

performance.

14. During thunderstorms, avoid using

telephones except cordless types. There
may be a remote risk of an electric shock
from lightning.

15. Do not use this unit to report a gas leak,

when in the vicinity of the leak.

SAVE THESE 
INSTRUCTIONS

INSTALLATION

1. Never install telephone wiring during a

lightning storm.

2. Never install telephone jacks in wet

locations unless the jack is specifically
designed for wet locations. 

3. Never touch uninsulated telephone wires or

terminals unless the telephone line has
been disconnected at the network interface.

4. Use caution when installing or modifying

telephone lines.

WARNING

To prevent the risk of fire or electrical shock,
do not expose this product to rain or any type
of moisture.

OTHER INFORMATION

Keep the unit away from electrical noise
generating devices, such as fluorescent
lamps and motors.

The unit should be kept free from dust, high
temperature and vibration.

The unit should not be exposed to direct
sunlight.

Do not place heavy objects on top of this unit.

Do not touch the plug with wet hands.

Summary of Contents for KX-FP85

























































































Reviews: