Panasonic KX-FP85 Operating Instructions Manual Download

Page: 11 / 88

Setup

For fax advantage assistance, call 1-800-435-7329.

Note for recording paper:

●

Avoid paper with a cotton and/or fiber content that is over 20%, such as letterhead paper or paper
used for resumes.

●

Do not use different types or thicknesses of paper at the same time. This may cause a paper jam.

●

Avoid extremely smooth or shiny paper that is highly textured.

●

Avoid paper that is coated, damaged or wrinkled.

Note:

●

Avoid double-sided printing.

●

Do not use paper printed from this unit for double-sided printing with other copiers or printers, or the
paper may jam.

●

Some paper only accepts print on one side. Try using the other side of paper if you are not happy with the
print quality.

Recording paper

Letter* or legal** size recording paper can be loaded. The unit can hold up to 50 sheets of 60

to 75

(16 lb. to 20 lb.) paper or 30 sheets of 90

(24 lb.) paper.

*Letter = 216 mm

279 mm (8

⁄

" x 11" )

**Legal = 216 mm

356 mm (8

⁄

" x 14" )

If you use legal size paper, please purchase a legal paper tray, Model No. KX-FA50 (p. 7) and
install it (p. 10).
For best results, only use inkjet paper such as Hammermill

Jet Print. If you use other

types of paper, the print quality may be affected.

Fan the stack of paper to prevent a paper
jam.

Pull the tension bar forward and hold open
while inserting the paper.

●

The paper should not be over the tab.

●

If the paper is not inserted correctly,
readjust the paper or the paper may jam.

Tab

Tension bar

Stack of
paper

Correct

Incorrect

Adding paper

1. Pull the tension bar forward and hold open while

removing all of the installed paper.

2. Add paper to the removed paper and straighten.

3. Fan the stack of paper.

4. Pull the tension bar forward and hold open while

inserting the paper.

Tension bar

Summary of Contents for KX-FP85

























































































Search results

Summary of Contents for KX-FP85

Reviews:

Related manuals for KX-FP85

Brands by name

Popular brands

Panasonic KX-FP85, Operating Instructions Manual

Search results

Summary of Contents for KX-FP85

Reviews:

Related manuals for KX-FP85

Brands by name

Popular brands