5
(Model KX-FP320E/KX-FM330E)
KX-FP320E/KX-FM330E
DISPLAY MESSAGE
CAUSE AND REMEDY
The unit is checking that there is no slake on the film. Wait a while.
The other party’s fax machine is busy or has run out of recording paper. Try again.
A recording paper jam occurred under the film cartridge. Clear the jammed paper.
[If the printout jams, please refer to Fig. a on the next page.]
PLEASE WAIT
REMOVE DOCUMENT
TRANSMIT ERROR
NO FAX REPLY
PAPER JAMMED
UNIT OVERHEATED
REDIAL TIME OUT
The other party’s fax machine dose not provide the polling function. Check with the
other party.
The other party’s fax machine is busy or has run out of recording paper. Try again.
A transmission error occurred. Try again.
The unit is too hot. Let the unit cool down.
[If many copies are nearly all black, this message will be displayed. When this occurs,
open the front cover and let the unit cool down.]
The document is jammed. Remove the jammed document.
Attempted to transmit a document longer than 600 mm. Press STOP to remove the
document. Divide the document into two or more sheets and try again.
[Alternatery, turn off service code #559 to enable sending of documents longer than
600 mm.]
There is no room left in memory to record a voice message. Erase some or all of the
message.
POLLING ERROR
PC FAIL OR BUSY
MASSAGE FULL
The fax function cannot be operated by the PC. The RS232C cable is not connected
correctly, or the software is not running on the PC. [If many copies are nearly all black,
this message will be displayed. When this occurs, open the front cover and let the unit
cool down.]
Note:
KX-FM330 only
The explanations given in the [ ] are for servicemen.
(Change from original page 27)
