12
(Model KX-FP320E/KX-FM330E)
KX-FP320E/KX-FM330E
2.4.4. SERVICE FUNCTION TABLE
(Change from original pages 104~105)
Code
Function
Set Value
Effective Range Default
Remarks
501 Pause time set
X 100 ms.
001~600
035
--------
502 Flash time set
X 10 ms.
01~99
8
--------
503 Dial speed select
1:10 pps 2:20 pps
1, 2
1
--------
520 CED frequency select
1:2100 Hz 2:1100 Hz
1, 2
1
See the Symptom/ Countermeasure
Table for long distance and
international calls in
2.3.3.3.1.
Defective facsimile section.
521 International mode select
1:ON 2:OFF
1, 2
1
See the Symptom/ Countermeasure
Table for long distance and
international calls in
2.3.3.3.1.
Defective facsimile section.
522 Auto standby select
1:ON 2:OFF
1, 2
1
The resolution reverts to the default
w hen transmission is complete.
523 Receive equalizer select
1:0km 2:1.8km 3:3.6km
4:7.2km
1~4
1
When the telephone station is far from
the unit or reception cannot be
performed correctly, adjust
accordingly.
524 Transmission egualizer select
1:0km 2:1.8km 3:3.6km
4:7.2km
1~4
1
When the telephone station is far from
the unit or transmission cannot be
performed correctly, adjust
accordingly.
533 Setting the number of times that
message transfer is redialed
00~99
00~99
03
Selects the number of times that
message transfer is redialed (not
including the first dialing).
534 Setting the message transfer /
pager call redial interval
001~999 sec
001~999
065
Sets the interval of message transfer /
pager call redial.
550
START input.
551 ROM check
START input.
552 DTMF single tone test
1:ON 2:OFF
1, 2
2
See
2.5. TEST FUNCTIONS.
553 Monitor on FAX communication
select
1: OFF 2:PHASE B
3:ALL phases
1~3
1
--------
554 Modem test
See
2.5. TEST FUNCTIONS.
555 Scan check
See
2.5. TEST FUNCTIONS.
556 Motor test
0
See
2.5. TEST FUNCTIONS.
557 LED test
See
2.5. TEST FUNCTIONS.
558 LCD test
See
2.5. TEST FUNCTIONS.
559 Document jam detection select
1:ON 2:OFF
1, 2
1
See
2.2.1. Paper Jam.
561 KEY test
See
2.5. TEST FUNCTIONS.
570 BREAK % select
1:61% 2:67%
1, 2
2
Sets the % break of pulse dialing
according PBX.
571 ITS auto redial time set
X number of times
00~99
03
Selects the number of times that ITS is
redialed (not including the first dial).
572 ITS auto redial line
disconnection time set
X second
001~999
065
Sets the interval of ITS redialing.
573 Remote turn-on ring number set X number of rings
01~99
20
Sets the number of rings before the
unit starts to receive a document in the
TEL mode.
576 K Break detect
1:ON 2:OFF
1, 2
1
--------
579 Detect bell type
1:TYPE 1 2:TYPE 2
1, 2
1
--------
580 TAM continuous tone detection 1:ON 2:OFF
1, 2
1
ON: STOP TAM operation w hen Dial
tone, etc. are detected.
590 FAX auto redial time set
X number of times
00~99
03
Selects the number of redial times
during FAX communication (not
including the first dial).
591 FAX auto redial time
disconnection time set
X second
001~999
065
Sets the FAX redial interval during
FAX communication.
592 CNG transmit select
1:OFF
2:ALL
3:AUTO
1~3
2
Lets you select the CNG output during
FAX transmission. ALL: CNG is output
at phase A. AUTO: CNG is output only
w hen automatic dialing is performed.
OFF: CNG is not output at phase A.
Memory clear: To reset the value to the default one, except the top margin (853) and
left margin (854).
