206
KX-FP215
20.2. Replacement Parts List
Notes:
Notes:
1. The “RTL” marking indicates that its Retention Time is
Limited.
When production is discontinued, this item will continue to
be available only for a specific period of time. This period
of time depends on the type of item,
and the local laws governing parts and product retention.
At the end of this period, the item will no longer be avail-
able.
2. Important safety notice
Components identified by
mark have special charac-
teristics important for safety. When replacing any of these
components, use only manufacture's specified parts.
3. The S mark means the part is one of some identical parts.
For that reason, it may be different from the installed part.
4. RESISTORS & CAPACITORS
Unless otherwise specified;
All resistors are in ohms (
Ω
) K=1000
Ω
, M=1000k
Ω
All capacitors are in MICRO FARADS (
µ
F) P=
µµ
F
*Type & Wattage of Resistor
20.2.1.
Cabinet and Electrical Parts
20.2.1.1. Operation Panel Section
20.2.1.2. Upper Cabinet Section
Caution:
(*1) The THERMAL HEAD KIT include the Thermal Head,
Holders and Connector.
For this model, please use only the Thermal Head for
repairing. Please don’t use the included Holders and
Connector.
20.2.1.3. Back Cover Section
Safe
ty
Ref.
No.
Part No.
Part Name & Description
Remark
s
1
PNGG1057Z1 GRILLE
PS-HB
2
PFGP1370Z PANEL, LCD
PC
3
PFBX1255Y2 BUTTON, 20 KEY
ABS-HB
4
PFBX1256Y2 BUTTON, 4 KEY
ABS-HB
5
PFBC1168Z2 BUTTON
ABS-HB
6
PFBC1169Z1 BUTTON
ABS-HB
7
PFHX1957Z1 SPACER, SHEET
PC
8
PFJS10M35Z CONNECTOR, 10 PIN
9
PFUV1103Z COVER, OPERATION
PS-HB
10
PFDG1494Z GEAR, DOC. EXIT
POM-HB
11
PFDR1089Y ROLLER, EXIT
S
12
PFUS1717Z SPRING, DOC. EXIT EARTH
SUS
13
PFHG1249Z SPACER, PAD (RUBBER)
14
PFHR1573Z COVER, SEPARATION HOLDER
ABS-HB
15
PFUS1712Z COIL SPRING
SUS
16
PFHR1575Z SPACER, DOC. FEED SUPPORT
POM-HB
17
PFUS1713Z COIL SPRING, DOC. FEED
SUS
18
PFBX1257Z1 BUTTON, 5 KEY
S
Safe
ty
Ref.
No.
Part No.
Part Name & Description
Remark
s
40
PNVE1006Z
PRINTER UNITS, THERMAL
HEAD KIT (*1)
S
41
PFHR1569X GUIDE, HOLDER (LEFT)
POM-HB
42
PFHR1570Z GUIDE, HOLDER (RIGHT)
POM-HB
43
PNGT2107Z-M
NAME PLATE
44
PFJS11M16Z CONNECTOR, 11 PIN
45
PFUS1710Z COIL SPRING
SUS
46
PFQT2708Z LABEL, INK RIBBON SET
47
PFQT2739Y LABEL, INK RIBBON
48
PFUS1699Z LEAF SPRING
SUS
49
PFUS1708Z COIL SPRING
SUS
50
PFUS1716Z SPRING, LOCK EARTH
SUS
51
N2GZBE000013
IMAGE SENSOR (CIS)
S
52
PFJS07M18Z CONNECTOR, 7 PIN
53
PFUS1494Z SPRING, CIS
SUS
54
PFUS1756Z COIL SPRING
SUS
55
PFDF1017Z SHAFT
S
SUS
56
PFDR1045Z ROLLER, DOC. SUB
POM-HB
57
PFBH1034Z2 BUTTON, HOOK SWITCH
ABS-HB
58
PFJS06M21Z CONNECTOR, 6 PIN
59
PFKE1058Z2 CABINET COVER, HANDSET
CRADLE (Top)
PS-HB
60
PFKF1092Y2 CABINET COVER, HANDSET
CRADLE (Bottom)
PS-HB
Safe
ty
Ref.
No.
Part No.
Part Name & Description
Remark
s
70
PNDN1004Z ROLLER, PLATEN
S
71
PFHR1572Z SPACER, HOLDER (RIGHT)
POM-HB
72
PFHR1571Z SPACER, HOLDER (LEFT)
POM-HB
73
PFDG1368Z GEAR
POM-HB
74
PFHR1574Z LEVER, PAPER TOP
POM-HB
75
PFUS1743Z TORSION SPRING
SUS
76
PFDG1518Z GEAR
POM-HB
77
PFHX1968Z SPACER, SHEET
78
PFUS1740Z COIL SPRING
SUS
79
PFDG1496Z GEAR
POM-HB
80
PFDG1497Z GEAR
POM-HB
81
PFUA1082Y CHASSIS
PS-HB
82
PFUS1703Y SPRING, RECORDING PAPER
SUS
83
PFUS1705Z COIL SPRING
SUS
84
PFDG1365Z GEAR
POM-HB
85
PFHX1757Z COVER, SHEET
86
PFHG1263Z SPACER, SEPARATION RUBBER
87
PFHR1446Z COVER, SEPARATION HOLDER
ABS
88
PFUS1746Z COIL SPRING
SUS
89
PFHR1567Z CASE
PS-HB
90
PFDR1056Z ROLLER
POM-HB
91
PFUS1540Z COIL SPRING
SUS
92
PFHR1447Z LEVER
S
POM-HB
93
PFUS1539Z COIL SPRING
SUS
94
PFDR1088Z ROLLER, DISCHARGE
POM-
HB/
EPDM
95
PFKE1057Y2 LEVER, LOCK
ABS+GF
20-HB
96
PFDR1087Z ROLLER, PICKUP
POM/
EPDM
Summary of Contents for KX-FP215
