Panasonic KX-FP206CX Operating Instructions Manual Download

Page: 52 / 60

9. Maintenance

9.4 Thermal head cleaning

If smudges or black/white lines appear on a
copied/received document, check whether there is dust
on the thermal head. Clean the thermal head to remove
the dust.

Important:

Remove the recording paper, then remove the
paper tray beforehand, otherwise the paper may
misfeed or jam.

Disconnect the power cord and the telephone line
cord.

Open the front cover (

), push the green button

(

), then open the back cover (

Remove the ink film (

Clean the thermal head (

) with a cloth moistened

with isopropyl rubbing alcohol, and let it dry
thoroughly.

Caution:

To prevent a malfunction due to static
electricity, do not use a dry cloth and do not
touch the thermal head directly.

Re-install the ink film and close the covers (see step
4 to 7 on page 7).

Install the paper tray (page 9), then insert the
recording paper gently (page 10).

Connect the power cord and the telephone line cord.

FP206_218CX-PFQX2488ZA-en.book Page 52 Friday, August 4, 2006 4:25 PM

Summary of Contents for KX-FP206CX





























































Search results

Summary of Contents for KX-FP206CX

Reviews:

Related manuals for KX-FP206CX

Brands by name

Popular brands

Panasonic KX-FP206CX, Operating Instructions Manual

Search results

Summary of Contents for KX-FP206CX

Reviews:

Related manuals for KX-FP206CX

Brands by name

Popular brands