![Panasonic KX-FP205C Operating Instructions Manual Download Page 34](http://html.mh-extra.com/html/panasonic/kx-fp205c/kx-fp205c_operating-instructions-manual_267277034.webp)
7. Answering Machine (KX-FP215 only)
34
Remote Operation
7.4 Operating from a remote
location
Important:
L
Program the remote operation ID beforehand
(feature #11 on page 37).
L
Set the unit to TAM/FAX mode before going out
(page 25).
L
Use a touch tone telephone for remote
operations.
7.4.1 Summary of remote operation
1
Call your unit.
2
Enter the remote operation ID during or after the
TAM/FAX greeting message.
3
When there are new recorded messages
1.
A long beep will sound.
2.
Short beep(s) will sound up to 8 times.
L
This indicates the number of new messages.
3.
New messages will be played back.
When there are no new messages
A short beep will not sound.
1.
Wait for 4 seconds or press
{
5
}
.
2.
All the recorded messages will be played back.
4
To end remote operation press
{
9
}
, then hang up.
Note:
L
When the voice memory is full, 6 beeps will sound
after playing back the recorded messages. Erase
any unnecessary messages.
7.4.2 Remote operation using remote
commands
1
Call your unit.
2
Enter the remote operation ID during or after the
TAM/FAX greeting message.
3
Enter a remote command within 10 seconds.
Note:
L
When you press a key, press firmly.
*1 If pressed within the first 5 seconds of a message,
the previous message will be played.
*2 To resume operation, press a command key within
10 seconds, otherwise the marker message
recording will start.
Recording a marker message
After playing back the messages, you can leave an
additional message.
1.
Wait for 3 beeps indicating the end of the remote
operation.
2.
Hear 1 beep.
3.
Wait about 10 seconds.
4.
Hear the voice guide and hear 1 beep.
5.
Leave a message.
To turn ON the auto answer setting
1.
Call your unit and let it ring 10 rings.
L
The answering machine will temporarily answer
the call.
2.
Enter the remote operation ID during or after the
greeting message.
L
A long beep will sound, and the receiving mode
will be set to TAM/FAX.
3.
Press
{
9
}
, then hang up the handset.
Key
Remote command
{
1
}
Repeats a message (during
playback)
*1
{
2
}
Skips a message (during playback)
{
4
}
Plays new messages
{
5
}
Plays all messages
{
7
}
Records greeting message
{
9
}
Stops current operation
*2
{
0
}
Turns OFF auto answer setting
{*}{
4
}
Erases a specific message (during
playback)
{*}{
5
}
Erases all messages
{#}
Skips the greeting message
FP205-215C-PFQX2548ZA-en.book Page 34 Tuesday, April 18, 2006 3:19 PM