6. Answering Device (KX-FP145 only)
40
unit will ask you to leave a marker message
(page 40).
L
If you do not press any command keys during
playback for over 2 minutes and 40 seconds,
the unit will beep twice and pause message
playback.
To continue playback, press
{
8
}
within 10
seconds after hearing the 2 beeps.
6.4.3 Other remote operations
Erasing a specific message
Press
{*}{
4
}
while listening to the message you
want to erase.
L
A long beep and 3 short beeps will sound.
The unit will then play back the next
message.
Erasing all the messages
Press
{*}{
5
}
to erase all the messages.
L
A long beep and 3 short beeps will sound.
Recording a marker message
After playing back the messages, you can leave
an additional message.
1.
Wait for 3 beeps indicating the end of the
remote operation.
2.
Hear 1 beep.
3.
Wait about 10 seconds.
4.
Hear the voice guide or hear 1 beep.
5.
Leave a message.
Re-recording your greeting message
You can change the TAD/FAX greeting message.
1.
Press
{
7
}
to start recording.
L
A long beep will sound.
2.
Speak clearly for up to 16 seconds.
L
If you pause for over 2 seconds, 6 beeps
will sound and the recording will stop.
Repeat from step 1 within 10 seconds.
3.
When finished recording, press
{
9
}
.
L
The new greeting message will be played.
Skipping the greeting message
Press
{
0
}
during the greeting message
playback.
L
The unit will skip the rest of the greeting
message.
Turning message transfer ON or OFF
You must program a transfer telephone number
beforehand (feature #60, page 49).
Press
{
8
}{
1
}
to turn ON the message transfer.
Press
{
8
}{
2
}
to turn OFF the message transfer.
L
If a transfer telephone number is not
programmed, you cannot turn this feature
ON. 6 beeps will sound.
Turning pager call ON or OFF
You must program a pager number beforehand
(feature #70, page 49).
Press
{
8
}{
3
}
to turn ON the pager call.
Press
{
8
}{
4
}
to turn OFF the pager call.
L
If a pager number is not programmed, you
cannot turn this feature ON. 6 beeps will
sound.
Changing the receive mode
Press
{
8
}{
0
}
to change the receive mode from
TAD/FAX to TEL.
L
You cannot return to TAD/FAX mode in the
same call. To return to TAD/FAX mode, see
the following.
Setting to TAD/FAX or FAX ONLY mode
from TEL mode
1.
Call your unit and wait for 10 rings.
L
A beep will sound.
2.
Enter the remote operation ID (feature #11,
page 46)
within 8 seconds
.
L
A beep will sound.
3. To switch to TAD/FAX mode:
Wait for 3 seconds, then the greeting
message will be played.
To switch to FAX ONLY mode:
Press
{*}
within 3 seconds.
4.
Hang up the handset.
FP141-145E.book Page 40 Wednesday, August 20, 2003 11:00 AM
Summary of Contents for KX-FP141E
Page 73: ...71 ...
