Panasonic KX-FLM600E Operating Instructions Manual Download

Page: 111 / 133

110

Jams

Clearing paper jams

If the unit does not eject any recording paper while printing, the recording paper has jammed.
When the unit detects a paper jam, the following messages will be displayed.

Display:

Open the top cover by pulling the top cover handle forward and check where the paper has jammed.

OPEN TOP COVER

PAPER JAMMED

Top cover handle

Top cover

If paper has jammed on the drum unit

If paper has jammed in the fuser unit

Remove the jammed paper carefully.

Caution:

≥

Do not touch or scratch the green drum surface
as this may damage the drum unit.

Close the top cover securely by pushing down on
the dotted area at both ends.

Pull the jammed paper out carefully.

Caution:

≥

Do not touch or scratch the green drum surface
as this may damage the drum unit.

Close the top cover securely by pushing down on
the dotted area at both ends.

Dotted
area

Note:

≥

If the jammed paper cannot be found, it may have stopped under the drum unit. Follow the instructions on the
next page to clear the jammed paper.

Caution:
The fuser unit gets
hot. Do not touch it.

Summary of Contents for KX-FLM600E






































































































































Search results

Summary of Contents for KX-FLM600E

Reviews:

Related manuals for KX-FLM600E

Brands by name

Popular brands

Panasonic KX-FLM600E, Operating Instructions Manual

Search results

Summary of Contents for KX-FLM600E

Reviews:

Related manuals for KX-FLM600E

Brands by name

Popular brands