Panasonic KX-FLM551, Service Manual

Page: 90 / 319

Code Function Set Value Default Remote
Setting
570 Break % select 1:61% / 2:67% 61% OK
573 Remote turn-on ring number 01~99 10 OK
590 FAX auto redial time set 00~99 02 OK
591 FAX auto redial line
disconnection time set 001~999sec 065 OK
592 CNG transmit select 1:OFF / 2:ALL / 3:AUTO ALL OK
593 Time between CED and 300bps 1:75ms / 2:500ms / 3:1sec 75ms OK
594 Overseas DIS detection select 1:1st / 2:2nd 1st OK
595 Receive error limit value set 1:5% / 2:10% / 3:15% / 4:20% 10% OK
596 Transmit level set -15~00dBm 10 OK
598 Receiving Sensitivity 00~48 43 OK
599 ECM Frame size 1:256 / 2:64 256byte OK
717 Transmit speed select 1:14400/2:12000/3:9600/ 4:
7200/ 5:4800/ 6:2400 14400bps OK
718 Receive speed select 1:14400/2:12000/3:9600/ 4:
7200/ 5:4800/ 6:2400 14400bps OK
771 T1 timer 1:35s / 2:60s 35s OK
774 T4 timer 00~99 × 100msec 00 OK
815 Sensor & VOX test --------- --------- NG
852 Print test pattern --------- --------- NG
853 Top margin 1~5 3 OK
854 Left margin 1~7 4 OK
880 History list 1:Start --------- NG
881 Journal 2 --------- --------- NG
882 Journal 3 --------- --------- NG
991 Setup list 1:Start --------- OK
994 Journal list 1:Start --------- OK
995 Journal 2 list 1:Start --------- OK
996 Journal 3 list 1:Start --------- OK
998 History list 1:Start --------- OK
999 Service list 1:Start --------- OK
OK means "can set".
NG means "can not set".
Note:
Refer to
SERVICE FUNCTION TABLE () for descriptions of the individual codes.
Example:
If you want to set value in the "004 Transmission report mode", press the dial key number 1, 2
or 3 corresponding to the Set Value you want to select. (1:ERROR/2:ON/3:OFF)
2.3.8. DIGITAL BOARD SECTION
90