No. Symptom
Cause
Countermeasure
The Paper exit sensor cannot
detect the recording paper
Exchange the Paper exit
check the PCB
Too thin recording paper
Use the recording paper from
to 24lb
No connection between the drum
unit and the whole unit
Check the terminal of the
voltage PCB or exchange
drum unit
18 Multiple feeding of recording
paper
Dirty separation pad of the
recording paper
Clean the separation pad
recording paper
19 Skewed feeding of recording
paper
Over the max capacity of the
recording paper
Set up to MAX 150 sheets
Too thick recording paper
Use the recording paper from
to 24lb
other reason
20 Wrinkle of recording paper
Too thin recording paper
Use the recording paper from
to 24lb
other reason
21 Document jam
The sensor cannot detect the top
of document
Exchange the sensor or check
PCB
22 Multiple feeding of document
Dirty separation pad of the
document
Clean the separation pad
document
23 Skewed feeding of document
Not matched the document to the
document slider
Adjust the document to the
document slider
24 Copying all white (Printing
pattern is OK)
Broken CIS
Exchange CIS
Broken the digital PCB
Check the digital board
25 Copying all black (Printing
pattern is OK)
Broken CIS
Exchange CIS
Broken the digital PCB
Check the digital board
26 Copying disordered (Printing
pattern is OK)
Broken CIS
Exchange CIS
Broken the digital PCB
Check the digital board
27 Cannot print legal size
Not selected the legal mode
Select the legal mode in the
programming mode
28 Copying slight
Broken CIS
Exchange CIS
29 Cannot feed document
The Paper feed sensor cannot
detect the document
Exchange the Paper feed
or check the PCB
30 CHECK DRUM' on the LCD
No connection between the drum
unit and the whole unit
Reset or exchange the drum
31 CHANGE DRUM' on the LCD
The Toner sensor cannot detect
the drum unit
Exchange the Toner sensor
check the PCB
Dust between the drum unit and
the sensor
Remove the dust
Metal dust under the drum unit
Remove the dust
32 FAILED PICKUP' on the LCD
Broken the resist sensor
Exchange the resist sensor
33 PAPER JAM' on the LCD
Broken the exit sensor
Exchange the exit sensor
45
Summary of Contents for KX-FLM551
