Panasonic KX-FLB883EX Operating Instructions Manual Download Page 21

Page: 21 / 112

2. Preparation

2 Preparation

Connections and Setup

2.1 Connections

Caution:

When you operate this product, the power outlet
should be near the product and easily
accessible.

Be sure to use the telephone line cord supplied
with this unit.

Do not extend the telephone line cord.

Note:

If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device.

If you use the unit with a computer and your internet
provider instructs you to install a filter (

), please

connect it as follows.

Power cord

Connect to a power outlet
(220–240 V, 50/60 Hz).

Telephone line cord

Connect to a single telephone line jack.

[

EXT

]

jack

You can connect an answering machine or an
extension telephone. Remove the stopper if
attached.

Answering machine (not supplied)

Network router/Network hub (not supplied)

Also connect networked computers.

To the internet

LAN cable (not supplied)

To assure continued emission limit compliance,
use only shielded LAN cable (category 5 straight
cable).

Important notice for the USB connection

Do NOT connect the USB cable until prompted by
the Multi-Function Station (page 28).

This model is designed to be used in Czech,
Hungary and Slovakia according to the location
setting feature.

The default setting is Czech. To change the location
setting, see page 59 (feature #114).

FLB883EX-PFQX2766ZA-OI-en.book Page 21 Friday, September 28, 2007 10:04 AM

Summary of Contents for KX-FLB883EX

















































































































Search results

Summary of Contents for KX-FLB883EX

Reviews:

Related manuals for KX-FLB883EX

Brands by name

Popular brands

Panasonic KX-FLB883EX, Operating Instructions Manual

Search results

Summary of Contents for KX-FLB883EX

Reviews:

Related manuals for KX-FLB883EX

Brands by name

Popular brands