Panasonic KX-FLB758RU, Service Manual

Page: 72 / 292

6.2.3. SERVICE FUNCTION TABLE
Code Function Set Value Effective
Range
Default Remarks
501 Pause time set X 100 msec 001~600 030 ----------
502 Flash time X 10 ms 01~99 85 ----------
503 Dial speed select 1:10pps
2:20pps 1, 2 1 ----------
520 CED frequency select 1:2100 Hz
2:1100 Hz 1, 2 1 See Symptom/Countermeasure Table for long
distance and international calls in.
521 International mode select 1:ON 2:OFF 1, 2 1 See Symptom/Countermeasure Table for long
distance and international calls in.
522 Auto standby select 1:ON 2:OFF 1, 2 1 The resolution reverts to the default when
transmission is complete.
523 Receive equalizer select 1: 0 km
2: 1.8 km
3: 3.6 km
4: 7.2 km 1~4 1 Set RX equalizer to automatical mode.
524 Transmission equalizer select 1: 0 km
2: 1.8 km
3: 3.6 km
4: 7.2 km 1~4 1
527 V8 Mode 1:DISABLE
2:ENABLE 1,2 2 ----------
529 Memory clear for Call Service “START” input
550 Memory clear: To reset the value to the default one, except the top margin
(#853),left margin (#854),time/day (#001),logo (#002),Fax No.(#003),History
and Directory. “START” input
551 ROM check See TEST FUNCTIONS(P.74).
552 DTMF signal tone test 1:ON 2:OFF 1, 2 2 See TEST FUNCTIONS(P.74).
553 Monitor on FAX communication
select 1:OFF
2:PHASE B
3:ALL 1~3 1 Sets whether to monitor the line signal with the
unit´s speaker during FAX communication or not.
554 Modem test See TEST FUNCTIONS(P.74).
556 Motor test 0 See TEST FUNCTIONS(P.74).
557 LED test See TEST FUNCTIONS(P.74).
558 LCD test See TEST FUNCTIONS(P.74).
561 KEY test See TEST FUNCTIONS(P.74).
570 BREAK % select 1:61% 2:67% 1, 2 1 Sets the % break of pulse sialing according PBX.
573 Remote turn-on ring number set X number of
rings 01~99 10 Sets the number of rings before the unit starts to
receive a document in the TEL mode.
590 FAX auto redial time set X number of
times 00~99 03 Selects the number of redial times during FAX
communication (not including the first dial).
591 FAX auto redial time disconnection
time set X second 001~999 065 Sets the FAX redial interval during FAX
communication.
592 CNG transmit select 1:OFF
2:ALL
3:AUTO 1~3 2 Lets you select the CNG output during FAX
transmission. ALL: CNG is output at phase A.
AUTO: CNG is output only when automatic dialing
is performed. OFF: CNG is not output at phase A.
Refer to SOMETIME THERE IS A TRANSMIT
PROBLEM(P.118).
593 Time between CED and 300bps 1:75 msec
2:500 msec
3:1 sec 1~3 1 See Symptom/Countermeasure Table for long
distance and international calls in. Refer to
RECEIVE PROBLEM(P.119).
594 Overseas DIS detection select 1:detects at
the 1st time
2:detects at
the 2nd time 1, 2 1 See Symptom/Countermeasure Table for long
distance and international calls in. Refer to
SOMETIME THERE IS A TRANSMIT
PROBLEM(P.118).
595 Receive error limit value set 1: 5%
2: 10%
3: 15%
4: 20% 1~4 2 If the number of errors during transmission
exceeds this value, the sending side terminates
the call.
596 Transmit level set X dBm - 15~00 10 Selects the FAX transmission level. Refer to
SOMETIME THERE IS A TRANSMIT PROBLEM
(P.118)and RECEIVE PROBLEM (P.119).
598 Receiving sensitivity 01= -01 dBm 20~48 43 Used when there is an error problem.
599 ECM frame size 1:256 2:64 1, 2 1 ----------
651 Write system program into the Flash Rom with a parallel cable. ----------
655 Call service 3 detection number See CALL SERVICE TROUBLESHOOTING
GUIDE (P.92)
72
KX-FLB758RU