Panasonic KX-FLB758RU, Service Manual

Page: 27 / 292

1 Connect the fax machine to the PC.
·
To use via USB connection, you must set the cable type
to
“USB” (feature #15) The default setting is
“PARALLEL”.
2 Start Windows 95/98/Me/NT4.0/2000/XP and close all
applications.
· The following dialog box may appear. Click [Cancel] to
close it.
·
You must be logged in as an administrator in Windows
NT4.0/2000/XP.
3 Insert the included CD-ROM into your CD-ROM drive.
·
The [Choose Setup Language] dialog box will appear.
Select the desired language that you want to use with
this software from the drop-down list. Click [OK].
The installation will automatically start.
· If the [Choose Setup Language] dialog box does not
appear:
The installation will automatically start.
· If the installation does not start automatically:
Click [Start], choose [Run...]. Type “d:\setup” (where
“d:” is the drive letter of your CD-ROM drive). Click
[OK].
(If you are not sure what the drive letter is for your CD-
ROM drive, use Windows Explorer and look for the CD-
ROM drive.)
· The installation will start.
4 Follow the instructions on the screen until all files have
been installed.
·
Readiris OCR software can also be installed. For details
about OCR software.
·
If the fax machine is not connected to your computer,
the [Port Selection] dialog box will appear.
Select the port number which you want to use.If the fax
machine is connected to your computer, the port
number will be automatically detected.
To uninstall the software
1. Click [Start].
2. Point to [Settings], then click [Control Panel].
3. Double-click [Add/Remove Programs].
4. Select [Panasonic Multi-Function Station] from
the list.
5. Click [Add/Remove...] (Windows 95/98/Me/NT4.0)/
[Change/Remove...] (Windows 2000/XP), then
follow the instructions on the screen.
3.5. INSTALLING MULTI-FUNCTION STATION SOFTWARE
27
KX-FLB758RU