manualshive.com logo in svg

Panasonic KX-FL611BL, Operating Instructions Manual, Page: 13 / 70

Share
Download
Panasonic KX-FL611BL Operating Instructions Manual Download Page 13

1. Introduction and Installation

11

7

Lift open the front cover (

1

), holding OPEN 

(

2

).

L

If the lower glass (

3

) is dirty, clean it with 

a soft and dry cloth.

8

Install the drum and toner unit (

1

) by holding 

the tabs.

L

Do not touch the transfer roller (

2

).

9

Close the front cover (

1

) by pushing down 

on both sides, until locked.

L

While the unit displays 

“

PLEASE WAIT

”

, 

do not open the front cover, or disconnect 
the power cord.

Toner save feature 

If you want to reduce toner consumption, set the 
toner save setting to ON (feature #79 on page 
42). The toner cartridge will last approximately 
40 % longer. This feature may lower the print 
quality.

1.6 Paper tray and paper 
tray cover

1

Insert the paper tray (

1

) into the slot (

2

) on 

the back of the unit.

1

2

3

1

2

1

2

1

FL611BL-PFQX2200ZA-en.book  Page 11  Thursday, April 7, 2005  1:15 PM

Summary of Contents for KX-FL611BL







































































Reviews:

No comments