Panasonic KX-FL501C Operating Instructions Manual Download

Page: 69 / 82

Replacement

If you replace the drum unit at the same
time, remove the new drum unit from the
protection bag. Remove the protection bar
from the drum unit.

With Panasonic face up on the toner
cartridge, match the red arrows on the
cartridge and the drum unit.

Used toner cartridge

Drum unit

Green drum surface

Pull up the right edge of the used toner
cartridge ( ). Remove the cartridge from
the drum unit (

●

The toner may stick to the cartridge and
the drum unit. Be careful when handling.
See page 4 for details.

●

Do not drop the toner on the green drum
surface.

●

Put the used toner cartridge into the
protection bag.

Slide the tab of the toner cartridge into
the slot of the drum unit.

Tab

Slot

Hold right side of the toner cartridge
under the lip on the drum unit and...

turn the two levers on the toner cartridge
with firm pressure.

Levers

The toner cartridge is installed when the
triangles match.

Triangles

Tap on the toner cartridge several times
to allow the toner to fall into the drum unit.
Grab the tabs, and shake the drum and
toner unit horizontally several times.

Tabs

Toner cartridge

Protection bar

New drum unit

New toner
cartridge

Drum unit

Hold here.

Red
arrows

Summary of Contents for KX-FL501C



















































































Search results

Summary of Contents for KX-FL501C

Reviews:

Related manuals for KX-FL501C

Brands by name

Popular brands

Panasonic KX-FL501C, Operating Instructions Manual

Search results

Summary of Contents for KX-FL501C

Reviews:

Related manuals for KX-FL501C

Brands by name

Popular brands