Panasonic KX-FL501C Operating Instructions Manual Download

Page: 21 / 82

Volumes

Melody ringer

●

You can select one of the four melodies
instead of the bell. Change the setting
(feature #17 on page 54). The melody you
selected will sound when the unit receives a
call.

Adjusting volumes

Ringer volume

4 levels (high/middle/low/off) are available.
While the unit is idle, press

●

If any documents are in the document entrance,
you cannot adjust the ringer volume. Confirm that
there are no documents in the entrance.

■

To turn the ringer off:

1. Press

repeatedly until the following

message is displayed.

Display:

2. Press .

●

To turn the ringer back on, press

■

While the ringer volume is set to off:
The display will show the following message.

When a call is received, the unit will not ring and
will display the following.

Handset receiver volume

5 levels (high to low) are available.
While using the handset, press or .

Monitor volume

8 levels (high to low) are available.
While using the monitor, press or .

INCOMING CALL

RINGER OFF

SET

YES:SET/NO:STOP

RINGER OFF= OK?

SET

Display

Summary of Contents for KX-FL501C



















































































Search results

Summary of Contents for KX-FL501C

Reviews:

Related manuals for KX-FL501C

Brands by name

Popular brands

Panasonic KX-FL501C, Operating Instructions Manual

Search results

Summary of Contents for KX-FL501C

Reviews:

Related manuals for KX-FL501C

Brands by name

Popular brands