Panasonic KX-FL313HK Operating Instructions Manual Download Page 57

Page: 57 / 74

8. Help

Make sure that the triangles (

) match, to install the

toner cartridge correctly.

If the lower glass (

) is dirty, clean it with a soft

and dry cloth.

Install the drum and toner unit (

) by holding the

tabs.

Make sure that the triangles (

) match to install

the drum and toner unit correctly.

Close the front cover (

) by pushing down on both

sides, until locked.

Place the handset on the cradle and attach the
document stacker.

While the unit displays

“

PLEASE WAIT

”

, do not

open the front cover, or disconnect the power
cord.

Waste disposal method

Waste material should be disposed of under conditions
which meet all national and local environmental
regulations.

FL313HK-PFQX2630ZA-en.book Page 55 Tuesday, August 29, 2006 10:19 AM

Summary of Contents for KX-FL313HK











































































Search results

Summary of Contents for KX-FL313HK

Reviews:

Related manuals for KX-FL313HK

Brands by name

Popular brands

Panasonic KX-FL313HK, Operating Instructions Manual

Search results

Summary of Contents for KX-FL313HK

Reviews:

Related manuals for KX-FL313HK

Brands by name

Popular brands