Panasonic KX-FC379CX, Service Manual

Page: 58 / 250

Code Function Set Value Effective
Range
Default Remarks
594 Overseas DIS detection select 1:detects at
the 1st time
2:detects at
the 2st time 1, 2 1 See Symptom/Countermeasure Table for long
distance and international calls in The unit can copy,
but cannot either transmit/receive long distance or
international communications (P.102). Refer to
Sometime There is a Transmit Problem(P.99) and
The unit can copy, but cannot either
transmit/receive long distance or international
communications (P.102).
595 Receive error limit value set X Number of
times 001~999 100 Sets the number of acceptable error lines when the
FAX reconstructs the received data. Refer to Receive
Problem(P.100).
596 Transmit level set X dBm - 15~00 10 Selects the FAX transmission level. Refer to
Sometime There is a Transmit Problem (P.99)and
Receive Problem (P.100).
598 Receiving sensitivity 43= -43 dBm 20~48 40 Used when there is an error problem. Refer to The
unit can copy, but cannot either transmit/receive
long distance or international
communications(P.102).
710 Memory clear except History data To reset the value to the default one, except History
data. Please restart a power supply after clearing a
memory.
717 Transmit speed selection 1:14400BPS
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS 1~6 1 Adjusts the speed to start training during FAX
transmission. Refer to Sometime There is a
Transmit Problem (P.99)and The unit can copy, but
the transmission and reception image are
incorrect(P.104).
718 Receive speed selection 1:14400BPS
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS 1~6 1 Adjusts the speed to start training during FAX
reception. Refer to Receive Problem(P.100) and The
unit can copy, but the transmission and reception
image are incorrect (P.104).
722 Redial tone detect 1:ON 2:OFF 1, 2 2 Sets the tone detection mode after redialing.
731 CPC mode 1:A 2:B 3:OFF 1~3 1 Sets the CPC signal detection mode from the
converter.
732 AUTO disconnect cancel time 1:350 ms
2:1.8 sec
3:OFF 1~3 1 “Set to “2” when the auto disconnect circuit operates
and cuts the line.”
745 Power ON film feed 1:ON 2:OFF 1, 2 1 When the power is turned on, the film is wound to
take up any slack.
763 CNG detect time for friendly
reception 1:10 sec
2:20 sec
3:30 sec 1~3 3 Selects the CNG detection tone of friendly reception.
771 T1 timer 1:60 sec
2:90 sec 1, 2 1 Sets a higher value when the response from the other
party needs more time during FAX transmission.
Effective only at the time of automatic transmission. It
takes 35 seconds to transmit manually.
774 T4 timer X 100 msec 00~99 0 Use this function when delay occurs in the line and
communication (ex. Mobile comm) does not work well.
775 Monitoring of message transfer 1:ON 2:OFF 1, 2 2 If set to ON a message can be monitored from this
unit´s SP-PHONE when transferring a message.
784 Voice prompt test You can hear the voice prompt from speaker after
pressing “START” key.
815 Sensor & Vox check See TEST FUNCTIONS(P.58).
841 Digital SP-phone check See Digital Speakerphone(P.129).
852 Print test pattern See TEST FUNCTIONS (P.58).
853 Top margin 1~9 5 ----------
874 DTMF ON time X msec 060~200 180 ----------
875 DTMF OFF time X msec 060~200 090 ----------
880 History list See History (P.79).
881 Journal 2 list See Printout Example (P.117).
882 Journal 3 list See Printout Example (P.117).
958 Cordless test See TEST FUNCTIONS (P.58).
57
KX-FC379CX