10. Help
65
10.3.7 Answering machine
10.3.8 SMS
The copied image is
distorted.
L
Adjust the width of the document guides to fit the actual size of the
document.
The printing quality is poor.
Please do not reuse the ink film!
Please use genuine Panasonic replacement film. Refer to page 7 for further
details.
L
The thermal head is dirty. Clean it (page 70).
L
Some paper has instructions recommending which side to print on. Try
turning the recording paper over.
L
You may have used paper with a cotton and/or fibre content that is over
20%, such as letterhead or resume paper.
Original
Copy
Documents or recording
paper frequently misfeed.
L
Clean the document feeder rollers, recording paper feeder and rubber flap
(page 69).
Problem
Cause & Solution
I cannot listen to messages
from a remote location.
L
Activate the remote operation feature by setting the remote operation ID
beforehand (page 40, feature #11 on page 43). Press the remote operation
ID correctly and firmly.
L
The unit is not in TAM/FAX mode. Change to TAM/FAX mode (page 41).
The other party complains
that they cannot leave a voice
message.
L
The recording time is set to
“
GREETING ONLY
”
. Select
“
1 MINUTE
”
or
“
3
MINUTES
”
(page 40, feature #10 on page 43).
L
The memory is full. Erase unnecessary messages (page 38, 39).
L
Make sure there is no other answering machine connected on the same
line.
I cannot operate the
answering machine with the
cordless handset.
L
Someone is operating the answering machine.
L
You are too far from the base unit. Move closer to the base unit.
The message indicator
flashes slowly.
L
This is normal. New messages have been recorded. Listen to the new
messages (page 38, 39) or turn the message alert OFF (page 49).
Caller ID information does not
display during message
playback.
L
The caller information will not be displayed if a message is recorded by
using
{
MEMO
}
(page 38).
Problem
Cause & Solution
I cannot send or receive SMS
messages.
L
You have not subscribed to the appropriate service. Consult your service
provider.
L
The SMS message centre number(s) are not stored or are incorrect. Store
the correct numbers (page 25).
L
Message transmission was interrupted. Wait until the message has been
sent before using other telephone functions.
The SMS message centre
number is logged in the caller
list and the message is not
received.
L
Someone tried to send you a message while SMS is turned OFF.
Problem
Cause & Solution
A B C
FC228FX-PFQX2496ZA-en.book Page 65 Monday, June 19, 2006 5:37 PM
Summary of Contents for KX-FC228FX
Page 75: ...75 Notes ...