Panasonic KW8M User Manual Download

Page: 54 / 87

KW8M Eco-POWER METER

◆

Monthly max. demand log (D.MON)

・

You can check the log data for 13 months (max. 13 records).

・

Press < >< > to change the month.

・

Press <SET> to display demand value at time select display. Press <SET> again to return the time
select display.

・

”0.00” is displayed when there is no data for monthly max demand log and [

－－－－－－－－

] is

displayed for the date.

(Example)

・

Press < > to display the date when the value was saved.

Press < > to shift the max demand log.
When there is no saved data, it doesn’t display the date and

[

－－－－－－－－

] is displayed.

After
1 second

September 2011

October 2011

November 2011

The date for the

max demand log

[LOG]

Lighting

[DEMAND]

Lighting

[kW]

Turn off

“m” (month)

Lighting

[kW]

Lighting

Summary of Contents for KW8M
























































































Search results

Summary of Contents for KW8M

Reviews:

Related manuals for KW8M

Brands by name

Popular brands

Panasonic KW8M, User Manual

Search results

Summary of Contents for KW8M

Reviews:

Related manuals for KW8M

Brands by name

Popular brands