Starting Up Scanner Applications Automatically
You can configure settings so that the application starts up automatically by "placing a document on the unit’s
feed tray" ("Touch Free Scanning") or by "Single Touch Scanning".
Note
•
If you are using a KV-S5076H, you can perform push scan using the LCD (page 41).
•
If you are using a KV-S5046H, press the Start/Stop button to perform Single Touch Scanning.
Setting the application to start up
Set whether an application will automatically start up and select under which conditions it will start up in the
Scan Button Setting Tool.
1.
Double click the (
) icon in the notification area of the task bar to open the Scan Button Setting Tool.
•
In Windows 8, open the Scan Button Setting Tool on the Desktop screen.
2.
Select Single Touch Scanning or Touch Free Scanning for the condition to automatically start up the
application.
3.
Select the application to start up.
Note
•
The set application is enabled for both "Touch Free Scanning" and "Single Touch Scanning".
•
For details about the Scan Button Setting Tool, refer to the Scan Button Setting Tool help.
Setting the scanning conditions
Scanning conditions are set on the setting screen of each application. For details about the setting screen of
each application, refer to the manual or help for that application.
Note
•
If you are using a KV-S5076H, press the OK button for more than 2 seconds to open the application
setting screen.
•
If you are using a KV-S5046H, press the Start/Stop button for more than 2 seconds to open the
application setting screen.
•
If the unit is in sleep mode, press the Start/Stop button to return to ready mode first.
Operating Manual
39
Operation
