Performing push scan using the LCD (KV-S5076H
only)
If you are using a KV-S5076H with Image Capture Plus, you can perform push scan using the LCD. Registered
jobs are displayed on the LCD. Use the cursor button (
A
) and OK button (
B
) to select a job.
Note
•
Register jobs in advance. For details about registering jobs, refer to the Image Capture Plus help.
•
The group name is displayed on the first line, and the job name is displayed on the second line of the
LCD.
1
2
1.
Place the documents on the feed tray with the side to be scanned facing up.
2.
Use or of the cursor button (
A
) to select a group.
3.
Use or of the cursor button (
A
) to select a job.
4.
Press the OK button (
B
) to start scanning.
Operating Manual
41
Operation
