Safety Information (For
United Kingdom only)
This appliance is supplied with a molded three pin
mains plug for your safety and convenience.
Should the fuse need to be replaced please ensure that
the replacement fuse is of the same rating and that it is
approved by ASTA or BSI to BS1362.
Check for the ASTA mark
ASA
or the BSI mark on the
body of the fuse.
If the plug contains a removable fuse cover you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until
a replacement cover is obtained.
A replacement fuse cover can be purchased from your
local Panasonic dealer.
IF THE FITTED MOLDED PLUG IS UNSUITABLE FOR
THE SOCKET OUTLET IN YOUR HOME THEN THE
FUSE SHOULD BE REMOVED AND THE PLUG CUT
OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED INTO
ANY 13 AMP SOCKET.
How to replace the fuse:
Open the fuse compartment with a screwdriver and
replace the fuse (and fuse cover).
FUSE
OR
FUSE
Precautions
Installation
•
Do not place the unit in direct sunlight, in a cold
draft, or near heating apparatus.
•
Do not place the unit near apparatus which
generate electronic or magnetic noise.
•
Protect the unit from static electricity.
•
Do not move the unit immediately from a cold place
to a warm place. It may cause dew.
CD-ROM
•
Do not write or stick paper on the front and/or back
of CD-ROM.
•
Do not touch the data side of the CD-ROM. When
handling the CD-ROM, be careful not to leave
fingerprints or otherwise damage the CD-ROM.
•
Do not leave the CD-ROM where it is directly
exposed to sunlight or near a heater for extended
periods.
•
Do not throw or bend the CD-ROM.
Operating Manual
11
Before You Start
