2
①
Use the screwdriver to loose the screws
of the rear panel and then remove the front
cover.
②
Put the HDD to the HDD bracket in
the chassis and then line up the four
screws to the four holes in the HDD.
Use the screwdriver to fix the screws
firmly to secure HDD on the HDD
bracket
③
Connect to the HDD data cable to the main
board and the HDD port respectively. Loosen
the power cable of the chassis and connect
another end of the power cable to the HDD
port.
④
After connect the cable, put the front
cover back to the device and then fix
screws of the rear panel.
Summary of Contents for K-NL404K/G
Page 26: ...21 Figure 4 16...
Page 28: ...23...
Page 29: ...24 Figure 5 1 Step 2 Input user name and password See Figure 5 2 Figure 5 2...
Page 32: ...27 av0318 0 PGQW2150ZA...
