7
4 Web Operation
This series network camera products support the Web access and management via PC.
Web includes several modules: Monitor channel preview, system configuration, alarm and etc.
4.1 Network Connection
Please follow the steps listed below for network connection.
z
Make sure the network camera has connected to the network properly.
z
Please set the IP address, subnet mask and gateway of the PC and the network camera
respectively. Network camera default IP address is 192.168.0.10. Subnet mask is
255.255.255.0. Gateway is 192.168.0.1
z
Use order ping ***.***.***.***(* network camera address) to check connection is OK or not.
4.2 Login and Main Interface
Open IE and input network camera address in the address bar. See Figure 4- 1.
Figure 4- 1
The login interface is shown as below. See Figure 4- 2.
Please input your user name and password.
Default ID is admin and PWD is 12345.
Note: For security reasons, please modify your password after you first login.
Input your IP
address here
