4.4 Event
Video Detect
4.4.1
VMD
4.4.1.1
The VMD interface is shown as in Figure 4-26.
Figure 4-17
Please refer to the following sheet for detailed information.
Parameter
Function
Enable
You need to check the box to enable VMD function.
Working Period
Here you can set arm/disarm period. Click on set button to open
period setup menu.
Anti-Dither
System only memorizes one event during the anti-dither period. The
value ranges from 0s to 100s.
VMD area
Here you can set VMD region and its sensitivity and area. The
default covers all regions. You must click on save before enabling
your setup.
Record
When record is enabled, you can trigger VMD to activate record.
Record Delay
System can delay the record for specified time after alarm ended.
The value ranges from 10s to 300s.
Send Email
If you enabled this function, System can send out email to alert you
when alarm occurs and ends.
Snapshot
You need to check the box here so that system can backup VMD
snapshot file.
54
Summary of Contents for K-EW114L03AE
Page 32: ...Figure 4 4 Figure 4 5 28 ...
Page 33: ...Figure 4 6 Figure 4 7 29 ...
