PAN9028 Wi-Fi/Bluetooth Module
3 PAN9028 Module
Module Integration Guide Rev. 1.0
Page 14 of 45
The antenna requires a cutout area of 8 mm x 5 mm under the PAN9028 module. This “Keep
out Area” shall be located in every layer under the module antenna. Note for example the “Keep
out Area” in all four layers of the PAN9028 evaluation board.
It is recommended to verify the perfect position of the module in the target application before
fixing the design.
Antenna Placement Recommendation
Use a ground plane in the area surrounding the module wherever possible.
All dimensions are in millimeters.
It is recommended to place the module:
•
In the center (horizontal) of mother PCB.
•
At the edge (horizontal) of mother PCB.
Top View
Min. 15.00
8.00
„Keep out Area“
Min. 15.00
12.00
1.00
3.00
PAN9028
