Panasonic Hybrid IP-PBX, Manual

Page: 30 / 40

4.2 Programming the IP Proprietary Telephone
30 Information about IP Proprietary Telephones
4.2 Programming the IP Proprietary Telephone
4.2.1 Assigning the IP Addressing Information
When Assigning IP Addresses to IP-PTs Using a DHCP Server
When using a DHCP server to automate IP address assignment of IP-PTs, only the IP address of the IP-
EXT16 card (PBX IP address) must be entered manually.
Other addresses (i.e., the IP address of the IP-PT, the subnet mask address, and the default gateway
address) will be assigned automatically by the DHCP server.
Follow the procedure below for all IP-PTs on the LAN that a DHCP server is used.
If you need to set VLAN parameters, follow the procedure described in "4.2.2 Setting the VLAN Parameters"
after assigning the IP addresses without ending programming.
* Valid IP address range: "1.0.0.0" to "223.255.255.255"
Select "Network".
ENTER
Select "Enable" for
DHCP setting.
Return to the
Menu screen.
Select "PBX".
PBX IP Address*
ENTER
ENTER
To set the IP address of the IP-PT
To enter the IP address of the IP-EXT16 card (PBX IP Address)
To the VLAN settings
Press "STORE".
STORE
The IP-PT will reboot
and establish connection
to the network.
To end programming
To set VLAN parameters
OR
Press "SETUP"
when it is displayed.
SETUP
To start programming
Supply power to the IP-PT.