Panasonic HX-A100 Owner'S Manual Download Page 22

Page: 22 / 65

- 22 -

Basic

Record motion pictures or still pictures using the smartphone as a remote control.

≥

For details, refer to the help of the Image App.

Recording motion pictures

Tap .

≥

This unit is set to the recording mode.

Tap the motion picture recording icon to start.

≥

Starts recording.

Tap the motion picture recording icon again to stop recording.

≥

Stops recording.

Recording still pictures

Tap .

≥

This unit is set to the recording mode.

Tap the Still picture recording icon to record still picture.

≥

Updating Live view images may stop while recording still pictures.

∫

About recording with this unit

You can record images using this unit without any connection with
this unit, turning the Wi-Fi mode off.

≥

Motion pictures and still pictures cannot be recorded at the same
time.

Recording

Preparation:

Connect this unit with the smartphone and start Image App. (

)

1080/30p

XXXXX

Live view

Displays an image from the
camera of this unit.

≥

Also outputs sound from
the microphone of this
unit.

Still picture recording
icon

Motion picture recording
icon

Angle of view

Select Standard or Wide
mode.

Recording start/
stop button

Photoshot
button

Summary of Contents for HX-A100


































































Search results

Summary of Contents for HX-A100

Reviews:

Related manuals for HX-A100

Brands by name

Popular brands

Panasonic HX-A100, Owner'S Manual

Search results

Summary of Contents for HX-A100

Reviews:

Related manuals for HX-A100

Brands by name

Popular brands