background image

Other Useful Camera Buttons/ Functions:

 

Buttons inside flip screen:

a)

 

 Bars – press to generate SMPTE bars, use to calibrate LCD / viewfinder

b)

 

Shutter:
i)

 

First shutter button turns default shutter speed on / off

ii)

 

If default is not enabled, + / - buttons can select variable shutter speed

iii)

 

Shutter speeds are relative to recording mode, frame rate, etc

c)

 

 Audio Select Switches:

i)

 

Camera can record sound from onboard stereo mic (2 channels), or from
external XLR mics through side XLR jacks (Input 1 and Input 2)

ii)

 

In HD or DVCPro mode, 4 channels of audio are always being recorded

iii)

 

Only 2 channels can be manually adjusted and monitored; the remaining
two come in at a fixed level

iv)

 

Switches inside flip screen select which 2 out of 4 channels can be
monitored and controlled using back dials

v)

 

Use audio levels meter display in LCD to monitor audio levels; meter shows
two marks @ -20 and –12dB; top of the scale turns red when levels are
peaking; aim to keep normal dialog between –20 and –12dB

vi)

 

Keep mic ALC on (in Recording Setup menu) to make sure audio doesn’t
exceed max threshold

vii)

 

Turn on Mic Power 48V phantom power switches if using condenser mics
that do not have their own power source; turn off if using dynamic
microphones (the latter is more likely – condenser mics are higher quality
but delicate and not usually used for rugged location shooting)

viii)

 

If using external XLR mics, make sure mic inputs are switched to mic (NOT
line; line is for mixer feed)

d)

 

Counter:
i)

 

Toggles display from Time Code

ii)

 

To UB (User Bits) = customizable information input during shoot like reel #,
shoot date, etc

iii)

 

To frame rate

iv)

 

To memory counter

e)

 

Zebra
i)

 

Exposure control tool that places white diagonal zebra stripes on LCD
display to mark all areas of the image where brightness has exceeded a
certain IRE threshold. These IRE values can be customized.

ii)

 

Press once to toggle MARKER tool. Marker works more or less like a spot
meter, taking local / targeted brightness readings for whatever is inside the

Summary of Contents for HVX200A - Camcorder - 1080p















Reviews: