24
VQT3K43
When the unit is turned on for the first time, a message asking you to set the date and time
will appear.
Select [YES] and perform steps 2 to 3 below to set the date and time.
1
Select the menu.
(
l
36
)
2
Touch the date or time to be set, then set the desired value using
/
.
A
Displaying the World time setting (
l
38):
[HOME]/
[DESTINATION]
≥
The year can be set between 2000 and 2039.
≥
The 24-hour system is used to display the time.
3
Touch [ENTER].
≥
A message prompting for world time setting may be
displayed. Perform the world time setting by touching the screen. (
l
38)
≥
Touch [EXIT] to complete the setting.
≥
The date and time function is driven by a built-in lithium battery.
≥
When this unit is purchased, the clock is set. If the time display becomes [- -], the built-in
lithium battery needs to be charged.
To recharge the built-in lithium battery, connect the AC
adaptor or attach the battery to this unit. Leave the unit as it is for approx. 24 hours and the
battery will maintain the date and time for approx. 6 months. (The battery is still being
recharged even if the unit is off.)
Preparation
Setting date and time
: [SETUP]
#
[CLOCK SET]
WARNING
THE LITHIUM BATTERY IN THIS EQUIPMENT MUST ONLY BE REPLACED BY
QUALIFIED PERSONNEL. WHEN NECESSARY, CONTACT YOUR LOCAL PANASONIC
SUPPLIER.
MENU
HDC-SD800EB_eng.book 24 ページ ２０１０年１２月２４日 金曜日 午前９時９分
