Panasonic HDC-SD800 Page 20 Operating Instructions Manual Download

Page: 20 / 160

VQT3K43

You can turn the unit on and off using the power button or by opening and closing the LCD
monitor.

Turning the unit on and off with the power button

Press the power button to turn on the unit.

The status indicator lights.

Turning the unit on and off with the LCD monitor

Unit is turned on when the LCD monitor is opened, and unit is turned off when it is closed.

During normal use, opening and closing of the LCD monitor can be conveniently used
to turn the unit on/off.

∫

To turn on the unit

The status indicator

lights.

∫

To turn off the unit

The status indicator goes off.

Preparation

Turning the unit on/off

A clicking sound is heard when the unit is shaken.

≥

This is the sound of the lens moving and is not a defect.
This sound will no longer be heard when the unit is turned on and change the mode to



To turn off the unit

Hold down the power button
until the status indicator
goes off.



HDC-SD800EB_eng.book 20 ページ２０１０年１２月２４日　金曜日　午前９時９分

Summary of Contents for HDC-SD800

































































































































































Search results

Summary of Contents for HDC-SD800

Reviews:

Related manuals for HDC-SD800

Brands by name

Popular brands

Panasonic HDC-SD800, Operating Instructions Manual

Search results

Summary of Contents for HDC-SD800

Reviews:

Related manuals for HDC-SD800

Brands by name

Popular brands