Panasonic HDC-SD10 Operating Instructions Manual Download

Page: 23 / 152

VQT2D01

Important:
While the DC cable is connected to the AC adaptor, the battery will not charge.

≥

Do not use the AC cable with any other equipment as it is designed only for this unit. Also, do
not use the AC cable from other equipment with this unit.

DC output terminal

Connect the AC cable to the AC adaptor and the AC outlet.

Connect the DC cable to the AC adaptor.

Insert the DC cable.

≥

Always use the supplied AC adaptor or a genuine Panasonic AC adaptor (VW-AD21PP; optional).

≥

When removing the AC adaptor, be sure to hold down the power button until the status indicator goes
off. Then remove the AC adaptor.

Connecting to the AC outlet



HDCSD10&TM10PP-VQT2D01_eng.book 23 ページ２００９年５月１８日　月曜日　午前９時３６分

Summary of Contents for HDC-SD10

























































































































































Search results

Summary of Contents for HDC-SD10

Reviews:

Related manuals for HDC-SD10

Brands by name

Popular brands

Panasonic HDC-SD10, Operating Instructions Manual

Search results

Summary of Contents for HDC-SD10

Reviews:

Related manuals for HDC-SD10

Brands by name

Popular brands