28
6.5.
HDD Hardware Test
1. Set the mode dial “Motion Picture Recording” mode.
2. While keep pressing the “Intelligent auto” button, “Manual focus” button and “Menu” button for more than 3 seconds until the
top screen of the Service Mode Menu being displayed.
3. Touch the [ 6 ] of LCD, select HDD hardware test.
Operation specifications
Indication contents
• HDD hardware test
Display the HDD hardware test result information.
• The error cord contents which are displayed
In the above table, displays other than “NO ERROR” are abnormalities of HDD.
Push the menu button to end the service mode, and then POWER OFF.
Error code
Function
NO ERROR
It is normal without the error
CTR ERROR
Controller Resistor Error
BUFF RAM ERROR
Buffer RAM Error
ECC DEV ERROR
ECC device Error
CPU ERROR
CPU RAM/ROM Error
COMMAND ERROR
Reserved
Summary of Contents for HDC-HS300EB
